All

B175M Bronze Thru Hull 0° Tilt - 1kWRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether ...

Low/High Frequency - In-Hull Chirp Transducer without ConnectorRely on Airmar's new broadband transducers for your ultimate fishing mission. Wheth...

B60 Thru-Hull Transducer 20° Tilt 9-Pin for Navico xSonicThe B60 is a 600W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element...

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a shor...

Mix & Match Cable for Raymarine 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m...

B60 20° Bronze Thru-Hull Mix & Match Cable NeededThe B60 is a 600 W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ f...

B175MW Medium Ultra-Wide 20-Degree 1kW CHIRP Transducer Requires Mix & Match CableAirmar’s innovative transducer designs have revolutionized t...

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short...

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull 12-Pin Transducer for Furuno TZTouch3The B175MW takes transducer design and performance to a whole ...

B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20ºThe bronze B60-20º provides a vertical beam without a fairing. Inside the housin...

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) ca...

DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - BluetoothDepth, Speed-Through-Water, Water Temperature, Boat AttitudeFor a product to be consider...

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts...

WS2-C06 NMEA 2000 Cable for Heading Sensor WeatherWith NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector 6M cable.6M/20'This...

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding o...

DST810 Smart™ Multisensor 23kHz Bronze NMEA 2000® Transducer - N2KDepth, Speed-Through-Water, Water Temperature, Boat Attitude! The DST810 Smart M...

B275C-LHW Bronze Thru-Hull - Low & High Wide FrequencyRequires Mix & Match CableGet more coverage under the boat with Airmar's wide beam C...

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding ...

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have interna...

DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20° Function: Depth / Temperature, Material: Plastic, Fixed Tilt Angle: 20° Frequency: 235...

Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures: L...

B175M Bronze Thru Hull 20° Tilt - 1kWRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fis...

Airmar DT820BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 20° Tilt Bronze NMEA 2000Airmar has taken its proven Tilted Element™ and b...

B175MW Med Ultra Wide 20°, 1KW Chirp Thru-Hull Transducer with 8-Pin Connector for Garmin Airmar’s innovative transducer designs have revolutioniz...

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pi...

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Ca...

TM275C-LHW 1kW Chirp Transom Mount TransducerGet more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transduc...

P66 Transom Mount Transducer f/Humminbird 9-Pin UnitsFeatures: Depth and temperature in one housing Plastic kick-up bracket Accommodates transom...

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holdin...

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to ...

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR...

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to b...

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 ...

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to ...

Transom Mounting Bracket for P66 Transducer - 2004 & upThis product may not be returned to the original point of purchase. Please contact the...